Notebook Hard Drive Upgrade Kit for SATA Hard Drives and Solid State Drives

EZ Upgrade 3.0 - SATA Notebook Hard Drive Upgrade Kit with USB 3.0 Connection

  • Quantity



With a Super Speed USB 3.0 connection you can now upgrade your notebook hard drive in just 10% of the usual time.
EZ Upgrade makes upgrading your notebook hard drive as easy at 1-2-3.
This innovative kit includes all the hardware and software needed to painlessly transfer all the data from an old hard drive to a new hard drive or SSD in three easy steps. To upgrade your notebook hard drive simply:

Upgrade your notebook in 3 easy steps
1) Insert your hard drive into EZ Upgrade enclosure and connect to the USB port on your computer.
The innovative EZ Upgrade enclosure connects to both Serial ATA (SATA) hard drives and solid state drives, making it the perfect tool to upgrade your notebook to a higher capacity hard drive or a fast SSD.

2) Run the included cloning software to copy all of your data, email, settings and OS from your notebook to the new drive.
Our Upgrade Suite CD has cloning software for both PC and Mac.

3) Swap out your old notebook drive with your new one, and you’re done!
Simply remove a couple of screws, slide out the drive in your notebook and replace it with your newly cloned drive from the EZ Upgrade enclosure. It really is that simple.

If that’s not enough, EZ Upgrade transforms the old hard drive from the notebook into a portable Super Speed USB 3.0 external backup and/or storage solution.

Once the new drive is installed, the old drive can be used in EZ Upgrade’s super fast USB 3.0 enclosure for external storage.

EZ Gig enables you to clone your hard drive in just three simple steps

Apricorn's EZ Gig transfers all of your data, settings, OS and email from your computer's internal drive to an external drive in just three simple steps. Once the clone is complete, simply swap out your notebook drive with the new one and your notebook is instantly upgraded.

Step 1
Select your Source drive

This is usually your computer’s internal drive and is denoted by the prefix IDE

Step 2
Select your Destination drive

This is your external drive connected to your computer by Apricorn’s EZ Upgrade

Data Select tool

Select files you wish to exclude from the clone, such as photos, videos, music or documents. This is helpful when migrating from a large HDD to a smaller SSD or when creating a Boot Disk.

Step 3
Press the "Start Clone" button

EZ Gig will clone everything to the drive on the EZ Upgrade. It really is that simple

Upgrading your system to a high performance 7,200 RPM hard drive

For most applications, a standard 5,400 RPM notebook drive provides great performance, but what if you are looking for even greater speeds?

In addition to increasing capacity, Apricorn's high performance 7,200 RPM drives can also increase your notebook's speed. The fastest available hard drive for notebook computers, Apricorn's Xtreme Drives have a 70% faster spindle speed and a 400% larger cache over 4200 RPM drives. These drives can improve overall system performance by 30%, providing desktop performance in a notebook computer.

Due to the higher spin rate of a high performance 7,200 RPM drive, you will need an upgrade kit with an AC Apdapter for additional power. To purchase an AC Adapter, click on the link below.

AC Adapter for EZ Upgrade


Data Transfer Rate USB 3.0 - up to 5Gbps
Power Supply 100% Bus Powered - AC Adapter only required when using a 7200 RPM drive
Interface Compatible with SATA hard drives
Dimensions 19mm X 84mm X 148mm (0.75” X 3.3” X 5.8”)
Warranty 3 year limited
Approvals FCC & CE
System Requirements Hardware: Pentium© CPU, 128MBs RAM, USB, CD ROM or CD-R/RW drive
Supported Operating Systems: Windows® 7, XP® & Vista™
Comments Hardware: Apple©G3 or later CPU, 64MBs RAM, USB, CD ROM or CD-R/RW drive
Supported Operating Systems: OS 10.x


EZ Upgrade 3.0 Manual
(Size: 1688676 KB)

EZ Upgrade 3.0 Datasheet
(Size: 491020 KB)

© 2019 Apricorn. All Rights Reserved. Website maintained by Exinent